FreezeCar Complete 2-Step AC Repair Kit: Stop Leak + Hydrocarbon R134a Refill
🌬️ The Ultimate 2-in-1 Solution: Repair Leaks First, Then Restore the Freeze!
Is your AC ice-cold right after a refill, but blowing warm air again a few weeks later? You don’t just need more gas—you have a leak.
Refilling a leaking system is like pouring water into a bucket with a hole in it. To fix it permanently, you need the FreezeCar 2-Step Repair & Refill Kit. Unlike “all-in-one” cans that dilute the solution, our kit provides two separate, professional-grade bottles to ensure maximum sealing power followed by a pure, high-efficiency recharge.
Step 1: The Stop Leak (Bottle A)
The Precision Repair.
Most leaks in R134a systems (cars made 1992–2016) happen because rubber O-rings and seals dry out and shrink over time.
- Restores Seals: Our concentrated Stop Leak formula circulates through the system, conditioning dried rubber seals and causing them to swell back to their original size.
- Stops the Drain: By rejuvenating the rubber, it creates a tight, flexible lock that prevents your new gas from escaping.
- Compressor Safe: Contains no clogging particles or glues—only safe, oil-based conditioners.
Step 2: The Eco-Refill (Bottle B)
The High-Performance Cool.
Once the system is sealed, it’s time to fill it with our premium Hydrocarbon R134a Replacement.
- Green & Clean: A natural, non-toxic hydrocarbon mixture that is eco-friendly and has near-zero global warming potential.
- Superior Cooling: Hydrocarbon molecules are more efficient than old chemical refrigerants, meaning your car cools down faster and vents colder air.
- Energy Saving: The lighter gas reduces friction in your compressor, reducing engine drag and improving fuel economy.
Why Choose the FreezeCar 2-Step Bundle?
|
Feature |
Benefit |
|---|---|
|
Separated Formulas |
Full Potency. By keeping the Stop Leak separate, you ensure the repair agent enters the system at full strength before the gas is added. |
|
Complete Repair |
Long-Term Fix. Stops the cycle of constant refilling and saves you money on wasted refrigerant. |
|
DIY Friendly |
Easy Application. Designed to work with standard manifold gauges or our FreezeCar DIY hose kits. |
|
Compatible |
R134a Systems. Safe for use in all vehicle AC systems designed for R134a. |
Simple Application Guide:
Inject Step 1 (Stop Leak): Connect to the low-pressure port and empty the Stop Leak bottle into the system. Run the AC to circulate.
Inject Step 2 (Refill): Connect the Hydrocarbon Refrigerant bottle. Fill until the pressure gauge is in the correct zone.
Drive in Comfort: Enjoy a leak-free, ice-cold ride all summer long!
➡️ Stop the leak and start the cool. Order your 2-Step Kit today!
⚠️ IMPORTANT: FOR PROFESSIONAL USE ONLY
Safety Notice: This product uses a highly efficient hydrocarbon refrigerant. It is flammable. While it is eco-friendly and not a greenhouse gas, please follow all local regulations and safety standards regarding the handling and maintenance of automotive AC systems.
