Don’t Just Refill Your AC—Repair It!
Is your car’s AC ice-cold right after a refill, but blowing warm air again a few weeks later? You don’t just need more gas—you have a leak.
Refilling a leaking system is like pouring water into a bucket with a hole in it. To fix it permanently, you need FreezeCar 3-in-1 Repair & Refill. We have engineered a professional-grade solution that combines a specialized leak sealant, premium compressor oil, and high-efficiency refrigerant into one single bottle.
Designed for vehicles using R134a, this formula ensures maximum sealing power, whisper-quiet compressor operation, and a full recharge in half the time of traditional methods.
The Power of the 3-in-1 Formula:
1. Precision Stop Leak (Seal)
The #1 cause of AC failure in older vehicles is drying rubber O-rings and gaskets. Our concentrated Stop Leak formula circulates instantly, revitalizing dried-out seals and causing them to swell back to their original size. It creates a flexible, airtight lock that prevents your new gas from escaping.
2. Premium Lubrication (Oil)
A dry compressor is a failing compressor. Our formula includes high-performance synthetic lubricant that mixes perfectly with the refrigerant. This reduces friction, lowers operating noise, and significantly extends the lifespan of your AC hardware.
3. High-Performance R134a Replacement (Gas)
Our advanced hydrocarbon blend is the perfect eco-friendly alternative to standard R134a.
-
Arctic Cooling: Hydrocarbon molecules transfer heat more efficiently than R134a, meaning your cabin cools down faster even in extreme heat.
-
Ultra-Concentrated: Net Weight 235g = Equivalent to 700g of R134a. You get massive cooling capacity in a compact, easy-to-handle can.
-
Eco-Friendly: A natural, non-toxic blend with zero ozone depletion and near-zero Global Warming Potential (GWP).
Why Choose the FreezeCar 3-in-1 Bottle?
| Feature | Benefit |
| 3-in-1 Mix | Total Convenience. Seals leaks, adds oil, and refills gas in one simple step. |
| R134a Optimized | Perfect Fit. Designed for the most common automotive AC systems (1992–2016). |
| High Capacity | More for Less. 235g of FreezeCar delivers the same volume as 700g of R134a. |
| System Safe | No Clogs. Contains no polymers or glues—only safe, oil-based conditioners. |
| Fuel Efficiency | Lower Drag. The lighter gas reduces strain on the engine, saving you fuel. |
Simple DIY Application Guide:
-
Connect: Attach your DIY charging hose to the low-pressure port (usually the thicker pipe) of your vehicle.
-
Charge: Empty the 3-in-1 bottle into the system while the engine is running and the AC is set to MAX.
-
Circulate: Run the AC for 15–20 minutes. This allows the Stop Leak to bond with the seals and the oil to coat the internal components.
-
Enjoy: Drive away in a leak-free, ice-cold car!
Stop wasting money on temporary fixes. Seal, lubricate, and chill with FreezeCar. Order your 3-in-1 bottle today!
IMPORTANT: FOR PROFESSIONAL USE ONLY
Safety Notice: This product uses a high-efficiency hydrocarbon refrigerant. It is flammable. Follow all local regulations and safety standards. Always wear safety goggles and gloves. Ensure you are using the correct Low-Pressure port. Do not overfill.
