Revive Your AC System & Seal Leaks Instantly. Most AC failures are caused by dried-out rubber seals. Freeze Car Stop Leak is a premium additive designed to condition, swell, and seal these leakage points without clogging your system.

  • Targeted Repair: Specifically formulated to seal leaks in O-rings, gaskets, and rubber hoses.

  • Preventative Care: Lubricates the system and prevents future drying/cracking.

  • Universal Compatibility: Mixes safely with R134a, R12, and all standard AC oils (PAG, Ester, Mineral).

  • Easy DIY: Connects and fills just like a standard refrigerant bottle.

17,57 

Availability: In stock

- +
Easy DIY
Done in 10 min
Fast Ship
Sent in 24h
Secure
Top Quality
Guaranteed Safe Checkout

Fix the Leak, Save the AC – The Smart Way.

 

Has your car’s air conditioning lost its cool? Before you pay for expensive diagnostics or replace costly metal parts, consider this: The #1 cause of AC refrigerant loss is dried-out rubber O-rings and seals.

Over time, the rubber seals in your AC system shrink and crack, allowing gas to escape. Freeze Car Stop Leak (Rubber) is the intelligent, low-cost solution to fix this problem permanently.

How It Works

 

Unlike messy sealants that can clog your system, FreezeCar Stop Leak uses a specialized conditioning agent. When it circulates through your AC system, it penetrates rubber components (O-rings, gaskets, and hoses), causing them to rehydrate and swell slightly. This restores their original shape and creates a tight, leak-proof seal.

Why Choose Freeze Car Stop Leak?

 

  • Save Hundreds on Repairs: Why pay a mechanic to replace a 50-cent O-ring buried deep in your engine? This can fixes it from the inside out.

  • Dual-Action Formula: Not only does it stop leaks, but it also contains high-quality lubricants that reduce compressor noise and extend the life of your system.

  • Safe & Compatible: Our formula is non-clogging and contains no polymers that harm recovery machines. It is fully compatible with:

    • Refrigerants: R134a, R12, and R1234yf replacements.

    • Oils: Mineral, PAG, and Ester oils.

When to use this product?

 

This product is perfect if:

  1. Your AC works but slowly loses pressure over a few weeks or months.

  2. You have an older vehicle where rubber seals are likely dried out.

  3. You want to perform preventative maintenance when refilling your system.

Instructions: Simply connect the can to the low-side port of your AC system (using a standard charging hose/adapter) and empty the contents into the system. Run the AC for 15-20 minutes to allow the sealant to circulate and condition the seals.

Note: This product is designed for rubber leaks (O-rings/hoses). It cannot repair cracks in metal condensers or evaporators.

Stop Leak also contains about refrigerant equivalent 250 gram r134a/r12.

 

ONLY FOR PROFESSIONAL USE! Follow the regulations for refrigerant!
Weight 0,20 kg
UN 2037 - RECEPTACLES, SMALL, CONTAINING GAS

DANGER

Extremely flammable gas. Contains gas under pressure; may explode if heated.

  • Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • Do not pierce or burn, even after use.
  • Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
  • Keep out of reach of children.
Shopping Cart
Scroll to Top